Overpressure
bag dust extractors with housings BOWW-45 series, serve the collection
of chips and dusts coming from technological processing of wood,
leather, fibers, plastics, and similar materials generating dry
and non-hygroscopic chips. The chosen model of the extractor
can work with one workstation or - using the pipeline
- with many workstations. Dust extractors BOWW-45 series
are made of zinced sheet and are designed to work outside the
production halls.
Dust extractors BOWW-45 series are equipped with filters made of
needlefelt polyester standard or antistatic as well
as (for special orders) of
many other materials suitable for the kind of extracted dust. To
make the extractor work most efficiently it is required to clean
the filters properly. Cartridge and bag filters should be
regularly cleaned by the shaker mechanical cleaning mechanism.
BOWW-45 series dust extractors, as overpressure devices, should cooperate with transportation fans.
It is recommended to place the extractor directly next to the production hall – – it will facilitate to service the machine
( empting waste material bags) – and it will enable
the return of the warm air to the room, minimizing the lost of heat. In
case of re-circulation of technological air it is important to use room
ventilation, to provide it with fresh air.
The modular design of the extractors enables development of the machine
in line L (see the drawing). The modules of the extractor’s
housing are made of zinced sheet. Single module contains 45 bag
filters, diameter 220 mm. Single modules of the housing are
fixed by screws.
|
Each
set of dust extractor contains necessary supports. Extractors are
equipped with vibrations frames. The filters are mounted to tube plate
by means of snap rings that guarantee connection tightness. Each
frame has its own electro-vibrator. As an option we offer vibrators
with pneumatic drive.
The collection of the waste
material from the inside is automatic, without breaks, by using various
transportation devices with independent electrical drives (rotary
valves, chain conveyors, screw conveyors).
- rotary valves
- chain conveyors
- rotary remover
The
collection of the waste material may be done directly to the containers
placed under the extractor - to the system of mechanical conveyors - or
to the system of pneumatic transportation to enable the evacuation of
the waste material to distant containers. Depending on the chosen
collection mode the extractor should be equipped with additional
support construction. For special orders the dust extractor is
equipped with sufficient amount of explosion panels to protect
against explosion effects and internal dry splinker-head fire
extinguishing installation .
For transportation purpose the modules of extractor are pre-
assembled, adapted to the sizes of the means of transport. |